After the screen is completed during the printing process, the screen printing mesh needs to be fully inspected and post-processed. What are the treatment methods? This is a matter of concern, whether it is advertising printing or industrial printing.
What should I do after the screen print mesh is created?
1. Check the positioning marks of the plates to meet the requirements of the print order.
2. Check for bubbles near the four sides of the omentum, blisters and nets: bubbles and sand holes should be remedied in time. Seal the four-sided screen to avoid ink leakage during printing.
3. Check the quality of the screen plate, including whether the graphic image is fully developed, whether the graphic image points or lines have burrs, defects, broken pens and mesh seals.
If any of the above conditions are found, various methods should be taken in time to solve the problem. . If this is not possible, consider re-plate to ensure future print quality.
4. Tape the adhesive portion of the screen and the frame to increase the bond strength between the screen and the frame.
After using the screen printing mesh after use, you must use daily cleaning solution.
The screen printing mesh can be washed with 5~10% glacial acetic acid solution for 5 minutes, then washed with a small amount of hot water. As long as we use and maintain it properly, we can extend the service life.