News

Limitations of screen printing

In the last article we said that silkscreen printing can survive a variety of printing methods, is its irreplaceable characteristics.At the same time, screen printing has its limitations in the current development and research.We need a correct scientific view of the current situation of screen ... Read More

Using photosensitive materials for plate making

In the last article, we covered the most basic principles of screen printing and the methods used in the platemaking process.Today we’re going to talk in detail about one of the most common methods of making plates in modern silk screen technology. We have a general understanding of the ent... Read More

Screen printing principle

Screen printing principles are expressed in many ways, but the core idea is the same. Screen printing is the silk fabric, synthetic fiber fabric or wire mesh stretch on the wooden frame or metal frame, the use of manual paint film or photochemical platemaking method to make screen printing plate... Read More

the origin of screen printing

Screen printing first originated in China, has a history of more than two thousand years.As early as in China’s ancient qin and han dynasties appeared the clip jie printing method.By the time of the eastern han dynasty the method of jijie batik had been popular and the level of printed prod... Read More

screen printing polyester mesh

Ordinary polyester mesh: woven from ordinary polyester fibers.Advantages: A.High tensile strength, able to withstand high tension B.Good wear resistance, can withstand printing ink pigments and squeegee on the screen wear.C.High light resistance, in natural room temperature light.Long storage per... Read More

Problems and solutions in screen printing process

Printing plate development is difficult. Causes: (1) too long exposure time. (2) after scraping, stored for a long time. (3) excessive drying temperature causes thermal crosslinking. (4) the photosensitive adhesive has been exposed. (5) when the bottom plate and film contact is not solid. (6) fai... Read More

screen printing frame and stretch frame

A.Selection of mesh frame material  General selection of LY12, LF2 and other hard alloy aluminum square pipe profile, size selection of 20mm wide, 20mm thick, four angles with argon arc welding or riveting processing.The metal frame has high precision and stable dimension.  2.Screen material sele... Read More

Screen printing requirements for screen

Screen printing plate making, printing process, screen performance has the following basic requirements:  1.High tensile resistance.Tensile strength refers to the wire mesh by tension, resistance to damage (fracture).In addition, the screen moisture after the strength of the change should be smal... Read More

Stretch mesh

Stretch mesh It is best to use pneumatic stretch and mesh machine, the quality requirements of stretch and mesh are as follows: 1. The tension of tension net is suitable and uniform (1) the use of pneumatic tension network when the tension requirements must be left to stand for 3-6 hours before t... Read More

Screen version of the production process

Generally speaking, screen plate production due to the use of different photosensitive materials, its production process is also different, but no matter what kind of process, screen plate production process must be the following steps: screen and screen frame selection, pull net, wash net, coati... Read More

Screen material selection

Currently the most used nylon mesh and polyester mesh.Nylon wire mesh heat resistance is poor, heat is easy to produce thermoplastic deformation, so that the tension is not uniform, affecting the quality of screen printing.Bonded wire mesh or screen template production is not suitable for high te... Read More

How to control the pressure in screen printing?

Answer: the effect of pressure is to ensure network edition and printing surface full line contact, under the premise the as small as possible. Because of the pressure, the greater the scraper, though a good contact with the screen, but the mesh flattening and scraper embedded net hole degree is ... Read More
<< < Previous 17181920212223 Next > >> Page 20 / 30