OEM manufacturer Nylon Bolting Cloth - UV DTF AB film 600mm UV DTF printer – Jiamei

600mm UV DTF

 

The uv dtf printer is a uniquely designed printer, which uses the AB film as a carrier to print the pattern on the A film, and then attaches the B film through the laminating device, and the ink is quickly solidified by the UV lamp, so that our pattern printing is completed.

 
After that, the pattern is cut out by a cutting machine, the pattern is glued on the substrate, and the film is torn off to complete the printing.

It has simple printing steps, wide application, adjustable size, short time and good effect.
Print Head
 
three head
Hoson board I3200-U1
 
Speed
 
4 pass: 6.5-10 m²/h
6 pass: 5.8-7 m²/h
Medium Width
600MM
Printing Medium
UV special AB film
Ink Type
Special environmental protection UV ink
Ink Capacity
500ML
Print Interface
Gigabit network interface
Working Environment
Temperature: 15-30℃ Humidity: 40-80%
Power Requirement
AC 220V 50HZ/60HZ 7.5KW
Power Supply
220V/110V
Print Height
Adjustable height 0~6MM
Machine Size
1900mm*1000mm*1500mm 110KG
Machine Package Size
1960mm*1070mm*750mm 150KG

Automated Operations

In the process of using the printer, there will be no complex operation that we need to control.

Automatically feed the A film, Start the printing, Automatically laminating and collect finsh printed prints.

Printing and laminating arecompleted at one time, eliminating the laminating machine;

High Precision & Printing Speed
We can offer different printheads, Print faster and Manipulate easier.
 
Control Panel & Heating system & Vacuum platform
The control screen panel is easy to operate and understand.
The temperature can be adjusted manually.
The vacuum platform can fix the film, and the printing process is not offset.
After printing, automatic heating and pressure cover B film.

Intelligent ink detection
 
Hoson Main board, high precision, fast speed, bright and delicate printing screen
 
High precision motors and guides
We will provide you instant online support service and free repair service.
Let’s see the printing process of UV DTF printing:
1.Print the pattern on the direct transfer film first, and print in the order of white ink. color ink, & varnish.
2.After printing,put the PET film on the direct transfer film. It is recommended to use a laminating machine to press it. Of course, it can also be operated manually.
3.Cut out the desired pattern and paste it on the material to be pasted.
4.Press the pattern repeatedly, slowly tear open the film,finished.