model number:JM01SH
Material：aluminum
Color:Silver aluminum screen frames
Roller frame Size:18″x22″ ,20′x24′ ,23′x31′,25′x36′ etc. or 20x30cm, 30x40cm, 50x60cm, 60x70cm, 50x70cm, 100x100cm, 120x120cm, 120x150cm etc
Diameter：41MM
Thickness：1.5MM
Application：T shirt/textile/glass/ceramic/PCB,Electronics printing,etc.
Mesh Tensile strength：25N/cm-85N/cm
Product feature：
1. Light weight frame for quick and easy handling.
2. Humanized design, greatly improving production efficiency
3. Easy clean up and long lasting durability
4. Corners are carefully welded to provide leak free frames
Product application：
1). apply to textile screen printing industry
2). apply to large advertisement industry
3). apply to auto-printing machine
4). apply to Christmas card and invitation card printing
5).apply to high precise LCD, CD,high precise multi-layered circuit board and electronic printing ect.
Assembly process：
Rotate each roller so that the outside of the t-slot (closest to you) is aligned with the second mark on the “inside” top of corner surface.Secure both bolts of one roller before proceeding to its opposite roller, locking down each bolt using a torque wrench.
Preparing the mesh: Cut the edge of the mesh and rip the remaining way across. This assures that the mesh is torn on a single thread and that it is straight. Do the same for one of the adjacent sides of the mesh.
Insert the locking strip into the T-slot
Softening the corners: Before tensioning, be sure to pre-soften the corners! This will prevent the mesh from tearing during the stretching process.
Tensioning the Mesh: Begin with either of the short rollers,。Use the torque wrench to loosen each bolt of this roller two turns.
flatten the frame，Using a tensiometer