Best Price for High Tension Silk Screen Printing Mesh - Screen printing emulsion remover powder – Jiamei
Screen printing emulsion remover powder
Product Description
| pure | Use ratio | Remarks | |
| J.M.H-500 | 50% | 1:100 | 1 kg of defilm powder mixed with 100kg of water |
| J.M.M-300 | 30% | 1:65 | 1 kg of defilm powder mixed with 65kg of water |
| J.M.N-100 | 15% | 1:45 | 1 kg of defilm powder mixed with 45kg of water |
Feature
Save screen mesh. /Easy to dissolve in water. / Reduced the cost for the enterprise. /Membrane cleaned off quickly and cleanly.
With little damage to the environment. / Aqueous solution can be long-term preservation. / Low Price Hot Sale Screen Printing Photo Emulsion Remover
WORKING INSTRUCTIONS
Mixing of Autostrip Powder
For general use dissolve 100 grams in 10 litres (18 pints) of cold water to make 1% strength solution. When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine is used a 2% solution strength is preferred for a longer solution life.
Use of Autostrip Powder
1.Remove all ink residues by applying Autosolve Screen Wash to both sides of the mesh and work in with a brush.
2.Wash both sides of mesh with water to remove all solvent traces.
3.With a brush, apply Autostrip liberally to both sides of the mesh.
4.Leave to stand for 3 to 5 minutes while the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.
5.Wash off the stencil with a strong spray followed by a high pressure gun.
packing&shipping
Best Price for High Tension Silk Screen Printing Mesh - Screen printing emulsion remover powder – Jiamei Related Video: